Shure Logo.png

Taking it to the Streets (the Backyard, Neighborhood Festival) or any Other Outdoor Event

August, 06 2013 |
Contributor: Dean Giavaras, Manager – Performance Listening Center & S.N. Shure Theater (and Horn Player)

Unless you live somewhere in the lower third of the United States, summer is the only time of year when there are opportunities to perform outdoors. Even here, at Shure headquarters just a few miles northwest of the Windy City, we stage four summer "Eat to the Beat" lunchtime concerts featuring bands formed from the ranks of our many talented associates. (Some estimates of the percentage of Shure employees who are musicians is a jaw-dropping 20%.)  This got us to thinking about playing outdoors.

For guidance, we turned to Dean Giavaras.  Prior to managing Shure's PLC, a state-of-the art studio and the performance space that Mix Magazine called a "listening playhouse", Dean developed his audio engineering skills with a degree from the University of Illinois and nearly two decades of professional service to sound companies, music venues and even Disney World.  As a veteran of a countless number of Chicago area festivals – Blues Fest, Gospel Fest and the Old Town School of Music's Folk & Roots Festivals - he was clearly our go-to guy.

[caption id="attachment_11991" align="aligncenter" width="250"]Dean Giavaras at Mixer That's Dean enjoying the shade of the canopy over the mix position.[/caption]

What You Need to Know

Whether you're planning to hire a band to perform at the annual rib cook-off or leading open-air summer worship at your church, things can go awry when an outdoor gig is thrown together. Avoidable equipment malfunctions, screeching feedback and complaints about volume levels (especially from people 100 feet from the stage) and unavoidable changes in the weather can add up to a frustrating experience for everyone involved.

In this post, you'll find some basic considerations along with Dean's suggestions for running a smooth show.

Get the Details

Playing in the parking lot is a lot different than playing in the club.  For one thing, there's the PA (and power) to consider. Community event organizers aren't as sophisticated as club owners and if they're doing this for the first time, they may think that every band comes with its own system.

In addition to nailing down the basics – load-in, performance and load-out schedules – there are other considerations that make outdoor gigs a little more complicated.

  • On what surface will the band perform? A stage? The grass? Concrete?

  • How large is the performance space or stage?

  • If it's a nighttime gig, who is providing the lights?

  • Will the band be under any kind of protective structure or canopy?

  • Where is the mixing board position? Will it be protected in any way?

  • Is there a site plan showing the performance area, mix position, audience coverage area and vehicle access?

  • What's the plan for inclement weather? (Wind, rain and even heat)

  • Will a safe power supply be provided?

  • Will cover be provided for all equipment positions?

  • Are there any limitations on cabling?

Next, the equipment. Even if you're not a touring band accustomed to dealing with riders, it's still important to list the onstage requirements, especially if you sense that the organizer is unfamiliar with the terrain and is booking multiple acts for the same event. And if you're the coordinator, letting performers know what you will provide tells them what they need to bring and may avoid same-day meltdowns. Chances are if you're playing at a block party, you're also providing the PA, the mics, the mixer, the cables and the sound crew.

[caption id="attachment_11990" align="aligncenter" width="675"]Wind Screens being used to mic Instruments during Outside PerformanceNote the wind screens on the mics, clips and sand bags on the music stands.[/caption]

Plan and Prepare

Now that you know what the organizers are providing, you can start assembling your own ready-to-roll rig – cables, mics, monitors and main speakers.

At Shure's summer Eat to the Beat events, where Shure associates provide musical entertainment, it's not uncommon for the hour-long show to feature four completely different ensembles – anything from a singer with an acoustic guitar to a 17-piece funk band. With no time for sound checks (the outdoor concerts are held during workday lunch hours) and a wide variety of genres and instruments, flexibility is key, according to Dean:

"Our usual rig is Meyer UPA-2P compact loudspeaker with USW-1P subwoofers - basically speaker-on-a-stick gear and a 16-channel Mackie Onyx 1640i mixing console we chose because it has an integrated firewire interface that allows us to multi-track the show. The equipment choices were relative to the budget we had and the technology that existed when we purchased this gear three years ago. There are a handful of other Mackie products that we're using as stage monitors.  We're doing four mixes of monitors with two Mackie SRM 450s and two Mackie Thump TLA15A. It's an easy, convenient package."

We use Shure's ULX-D wireless mic system. Last year, we had 8 channels in the rack but this year we trimmed it down to four channels of wireless. So those are my primary vocal mics. They provide the flexibility of being able to work quickly anywhere.

For the drum set, it's a Beta 91A kick drum, just an SM57 on the snare, either a Beta 98 AMPs or Beta 181s for the toms and actually, we've done it a few different ways. For the overheads, we use either a Beta 181 or a KSM137. We've taken to using Beta 27s for our guitar cabinet mics –they sound really nice on guitars and then we'll sprinkle in some 57s for other auxiliary things. The horn set-up for that big band included some 57s and some KSM32s. Typically, there are one or two direct inputs for keyboards, bass guitar, etc. We have some Radial direct boxes and some Whirlwind direct boxes. There isn't much time between bands so we try to make one input list that will work for everyone.

We are limited to 16 inputs because for a smaller outdoor gig like this one, doing what's adequate and not going berserk is important. So we write a 16-input list based on what we know about each band. It turns out to be standard kind of stuff – kick, snare, a couple of toms, an overhead, one bass input unless there's some specific reason why we need two, three electric guitar inputs, an acoustic guitar input, one or two keyboard inputs and four ULX-D vocal mics – and those can also be used as horn or percussion mics."

[caption id="attachment_11992" align="aligncenter" width="250"]Legendary SM57 on snare.Legendary SM57 on snare.[/caption]

Keep it Simple

Let's say you're limited to a mixer with 16 inputs. With a little experimentation, you may find workarounds like the ones that Dean describes here: "Our keyboard setup generally requires one mono input for something like a Yamaha electric piano and then the second one if someone wants to add a synthesizer.

In a recent performance, one of the other bands had a Nord synthesizer played through a Leslie-style cabinet. A typical miking set-up for a Leslie is two mics (sometimes in a X-Y stereo arrangement) for the high frequency rotor at the top and another low frequency on the bottom for a nice stereo image.  I only had one input available when I wanted to capture the highs and lows separately, so I used a Y cable. I put a Beta 181C on the top and a Beta 181C on the bottom in a mic Y so I ended up with one input channel that did double duty and still left me with an input for the electric piano. When it was time for that band, we unplugged it from the synth DI and plugged it back into that mic Y cable which was preset with two mics on the Leslie.  It sounded great, worked out fine.

In a situation where you're using a Y cable, you have to remember what you're giving up – which is individual control of gain, cue and everything else.  But where there are two very similar sound sources like a little string section with six violins and an insufficient number of inputs, you can put six clip-on mics on them and Y them together – 2, 2 and 2, using just three inputs. It can work with horns and toms, too.

This is the kind of advance planning you need to think about when multiple bands are going to appear on the same stage without much time between them. "These are good cheats and they can work. I've even deployed a three-fer – a Z cable – to actually combine three sound sources. But you can run into impedance issues and other problems that will degrade the quality of the audio eventually. You want to think hard when you're doing that."

[caption id="attachment_11996" align="aligncenter" width="675"]Performing directly on a concrete slab - NO stage!Performing directly on a concrete slab - NO stage![/caption]

Consider the Acoustics

If you are performing in an open area, you won't have much in the way of ceilings, floors, walls and other structures to create a reverberant field. Indoors, sound waves bounce off these surfaces, with decaying reflections that give each room its own unique acoustical signature. The field tends to reinforce low frequencies, causing the sound to seem louder. In an outdoor setting, this won't be the case. Dean doesn't think this is necessarily undesirable: "You're as close as you're ever going to be to free field with no audio reflection and that can really be the best situation for getting a nice wave front from a speaker system."

In addition to four-lane traffic noise from Touhy Avenue and a railroad crossing less than 50' away, Shure's glass-enclosed headquarters make Eat to the Beat a challenge. "The space where Eat to the Beat takes place is pretty awkward. It was never designed for musical performances, obviously. There's glass on three sides and the space narrows."

Speakers: "We try be aware of the directional patterns of the speakers, especially in terms of high frequencies. Ours have 60-degree conical horns, which gives us narrower throw and helps keep the high frequencies off of the glass structures."

"We don't need a delay fill since our audience is generally about 200 people – and the space isn't that large to begin with. Doing a delayed system is definitely desirable in some cases, but it requires additional setup time; time to tune the system."

Monitors: "One of the things that can affect outdoor gigs is the importance of understanding a tent roof and what it does to sound onstage. It's a big deal.  Most tent roofs are made out of plastic-type sheeting and since they are fairly low, they can be really reflective audio-wise. Often, the stage monitors are pointing toward the ceiling and not only does it create a build of acoustic energy under the tent, but it makes the monitors feedback and can also color the sound –making it muddy or weird sounding.

You have to be aware of this factor and try to place the mics accordingly - aim them away from the tent roof and try to EQ carefully when you're setting up the monitors. Finally, definitely try to keep the stage volume under control when you're under a tent roof."

[caption id="attachment_11998" align="aligncenter" width="250"]Having some good help on any gig is always a plus.Having some good help on any gig is always a plus.[/caption]

Predict the Unpredictable

If the band, the rig and the mixing board are not in a protected area, there is weather to consider: rain, wind and heat. Minimally, this includes wind screens for the mics, plastic tarps or sheets of Visqueen for equipment, cable ties, bungee cords and cable covers in addition to creature comforts like sunscreen, bottled water, extra shoes and socks, a change of clothing, hand wipes and the kind of inexpensive folding camp chairs that are available for under $10.  Remember, too, that equipment sitting in the hot sun can overheat.

Dean agrees: "Temperature and humidity can wreak havoc on the system, especially as things can change over the course of a long event. Usually you're setting up in the heat of the day and when the temperature changes in the evening, you need to be aware that you may need to adjust system tuning to compensate.  Wind is a factor – not just the wind blowing things around or the wind noise in the mics, but the effect of the wind on the gradient sound. If the stage has a line array or a flown speaker system, that stuff is going to move if it's windy.  Even a moderate breeze can move a PA that has been precisely aimed. You may need to use different techniques to keep gear in place and tie them down – bungee cords, cable ties, or trick line.

Another issue is the power source. Outdoor building power requires GFI outlets. Generators are more common - but it's critical for it to be properly grounded. There needs to be a ground rod, AND it needs to be attached to the generator; AND pounded into the ground. Always check the power before the show starts, even if you're using AC power. And if you're using a generator, all kinds of weird things can happen so make sure that you meter it.

The other safety concern is water. You need to separate the water and the power any way you can. Equipment and water is another problem. You might even want to consider bagging the main power connections or having garbage bags available to cover any AC quad boxes or power strips because you can still have a show in a light drizzle. If there isn't lightning or a lot of wind and your AC is bagged to keep the water out, you won't have to cancel if there are just a few drops of rain."

Oh, one other thing.  If you're using charts or sheet music, you might want to secure it to the music stands. At one Shure Eat to the Beat performance, a sudden gust of wind picked up and sent papers flying in a bit of unexpected theater.  Undaunted, the band played on.
Davida Rochman
A Shure associate since 1979, Davida Rochman graduated with a degree in Speech Communications and never imagined that her first post-college job would result in a lifelong career that had her marketing microphones rather than speaking into them. Today, Davida is a Corporate Public Relations Manager, responsible for public relations activities, sponsorships, and donation programs that intersect with Shure at the corporate and industry level.

Products mentioned in this Page