Shure Logo.png

Shure Tech Tip: Radio Frequency Scanners - Valuable Tools for Troubleshooting Wireless Systems

An RF (Radio Frequency) scanner can be extremely useful in any installation employing wireless microphones if your wireless system doesn't include an onboard scanner. This post explains how they work and how to get the most out of them.
February, 05 2007 |

The popularity of wireless microphone systems continues to increase. This growth is unfortunately paralleled by the growth in popularity of many other forms of wireless technology, including mobile devices. As the available frequency spectrum continues to get increasingly crowded, the potential for interference in wireless microphone systems also increases, causing headaches for both the end user, and the sound system installer, and the audio consultant. Given the increasingly unpredictable nature of wireless technology, an RF (Radio Frequency) scanner can be an extremely useful tool for any installation employing wireless microphones if your wireless system doesn't include an onboard scanner.

What Is an RF Scanner, and How Does It Work?

An RF scanner is an electronic device designed to detect radio activity over a certain range of frequencies. A car radio is a type of RF scanner focused on a specific band of frequencies, commonly known as AM and FM radio. The practical application of an RF scanner to wireless microphone systems is two-fold:

  1. To search for clear frequencies in a new installation, or
  2. To troubleshoot interference problems at an existing installation site. We recommend scanning for potential problems ahead of time due to the ever-changing nature of the wireless spectrum.

Most RF scanners are simple to operate and offer a variety of methods for frequency scanning. The simplest method to check for interference is to enter the frequency of the wireless microphone system in question and listen for any audible signals. Remember, anything that is picked up by the scanner when the wireless transmitter is turned off is a potential source of interference for the wireless system. Certain types of interference will produce distinctive sounds. Paging systems produce a series of beeps and crackling noises. Audio information is, of course, easily recognizable. Be sure to check adjacent frequencies as they can also cause interference even though they are not on the exact frequency of the wireless system.

This method is useful for checking one or two problem frequencies, but can be cumbersome when searching for clear frequencies at a new site. In these situations it is best to use the scanner's search or scan function. This function will automatically scan through a preset or programmed range of frequencies, stopping wherever there is significant RF interference. Avoid these frequencies.

Additional Features of RF Scanners

Some scanners offer the ability to search repeatedly over a certain range. This feature allows the scanner to catch intermittent transmissions missed on initial scans. To further refine this technique, a scanner can be connected to a voice-activated recorder and operated over an extended period of time, repeatedly scanning a particular frequency range. The recorder will activate whenever the scanner catches an active frequency. This is useful for catching intermittent interference on-site, instead of spending an entire day waiting for the problem to occur.

Most scanners are equipped with a headphone output that can drive the record (or line) input of a recording device. See the below diagram illustrating the connection of a scanner to a recorder:

RF Scanner diagram


Getting The Most Out of Your RF Scanner

To make effective use of an RF scanner, be familiar with the concept of squelch. Most quality scanners are equipped with a squelch control which allows the user to eliminate unwanted background noise on normally inactive frequencies. Care must be taken when setting the squelch control. If squelch is set too high, significant sources of RF interference may be overlooked. If squelch is set too low, the scanner will frequently stop on background noise when using scan or search modes. To set the squelch control, select a known clear frequency, e.g., an unused local TV channel, and rotate the squelch control until the background noise disappears, then add just a bit more squelch for extra insurance.

When scanning for potential sources of interference, it is only necessary to search the frequency ranges where wireless microphone systems are assigned. If you are considering a UHF system, first determine the operating range of the wireless system in question and scan only those frequencies. Commercial AM and FM radio bands, for example, are well below the UHF band and are unlikely to cause interference. However, occasional interference can occur in cases of extreme proximity (less than a mile) to a high-power radio transmitter.

Scanner Suggestion

Designed for wireless microphone scanning, the WiNRADiO receiver WR-G33WSM, which works with Wireless Workbench®, has been successfully used by many Shure customers. The single most important feature in determining which scanner to purchase is what frequency ranges it covers. Be certain that the desired wireless microphone frequencies are covered by your choice of RF scanner. Other useful scanner features include a good squelch control, the ability to limit the scan range, and programmability. This last feature allows a variety of frequency ranges to be saved in memory and recalled at any time. Finally, a headphone output or line output is useful for aural recording of RF interference. An investment in a scanner with these basic features will prove invaluable for all wireless microphone installations.

Editor's Note: This post was revised in May 2016. 

Davida Rochman
A Shure associate since 1979, Davida Rochman graduated with a degree in Speech Communications and never imagined that her first post-college job would result in a lifelong career that had her marketing microphones rather than speaking into them. Today, Davida is a Corporate Public Relations Manager, responsible for public relations activities, sponsorships, and donation programs that intersect with Shure at the corporate and industry level.